Monday, October 10, 2016
Saturday, October 1, 2016
LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK]
YouTube : https://www.youtube.com/watch?v=E7zbs6of_4I
Problem Description
1.LG G2 stuck at boot logo.
2.Cannot enter download Mode
3.Stuck at factory reset screen (factory reset processing) and cannot enter RECOVERY
4.cannot enter fastboot mode
5.Phone not detecting in your computer either windows or linux!
6.Cannot enter qhsusb mode.
7.Gone to service centre and they said to replace motherboard and u hav no warranty!
This can occur when flashing wrong images to the partitions when in qhsusb mode.
IF YOU CAN ENTER QHSUSB MODE [BLACK SCREEN BOOT] THEN FOLLOW THIS TUTORIAL
https://prosantaghosh91.blogspot.in/2015/08/lg-g2-repair.html
http://criticalerroronlgg2fixing.blogspot.in/p/blog-page.html
Only solution for you guys is the following..
[THIS SOLUTION IS EASY BUT NEEDS YOU TO MESS WITH THE MOTHERBOARD.BUT SOLUTION DOESNOT REQUIRE HARDWARE SERVICE SKILLS.THE ONLY OTHER SOLUTION FOR YOU GUYS IS TO CHANGE THE MOTHERBOARD.SO THIS WIL BE YOUR ONLY CHOICE.]
Tools Required
1.Screw driver2.Pry tool
3.Insulated small wire piece (sharped one edge).
Steps to FIX
1. Remove the Backcover of your phone.
2. Remove the backplastic on upper part of phone using screw driver.
after remove back cover and upper plastic
![]() |
| https://www.youtube.com/playlist?list=PL6179BzZqbzCbrEosyfifKh5ZHc0aJ9kL |
3. Remove Battery Connector.
[THIS VIDEO IS A GOOD TUTORIAL TO DO ALL THIS]
https://www.youtube.com/watch?v=E7zbs6of_4I
4.Remove all connectors except camera connector.
After removing connectors
![]() |
| https://www.youtube.com/playlist?list=PL6179BzZqbzCbrEosyfifKh5ZHc0aJ9kL |
5. Remove Buttons plate,(buttons plate is sticked to the surface.)
After removing buttons plate
![]() |
| https://www.youtube.com/playlist?list=PL6179BzZqbzCbrEosyfifKh5ZHc0aJ9kL |
6.Reattach connectors except battery connector.
after re-attaching battery connector
![]() |
| https://www.youtube.com/playlist?list=PL6179BzZqbzCbrEosyfifKh5ZHc0aJ9kL |
7. Connect phone to computer using usb cable
8. Short the capacitors c5000 and c5004 of the IC U5001 using wire end(Keep on trying till phone light comes and pc detects phone.)
![]() |
| https://www.youtube.com/playlist?list=PL6179BzZqbzCbrEosyfifKh5ZHc0aJ9kL |
capacitors to short
find the capacitors using this image.(short both siverdots and capacitor terminals above it)
![]() |
| https://www.youtube.com/playlist?list=PL6179BzZqbzCbrEosyfifKh5ZHc0aJ9kL |
find capacitors
Like this,
![]() |
| https://www.youtube.com/playlist?list=PL6179BzZqbzCbrEosyfifKh5ZHc0aJ9kL |
Shorting the capacitors
![]() |
| https://www.youtube.com/playlist?list=PL6179BzZqbzCbrEosyfifKh5ZHc0aJ9kL |
shorting capacitors
9. After going to black screen (qhsusb mode) attach battery connector and remove usb cable..
10. Then follow this thread to flash only laf.img,aboot.img and boot.img of your stock ROM.
https://prosantaghosh91.blogspot.in/2015/08/lg-g2-repair.htmlhttp://criticalerroronlgg2fixing.blogspot.in/p/blog-page.html
11. After successful flash of images, remove battery connector and other connectors and reattach buttonsplate.
12 After attaching buttons plate,check your device going into download mode, and use flash tool to flash stock rom.
THEN PHONE SHOULD BOOT NORMALLY...ATTACH BACK PLASTIC AND PHONE BACK COVER..BE CAREFUL NOT TO TOUCH ANY CONTACTS..
THATS ALL,NOW YOU HAVE YOUR DEVICE COME BACK ALIVE...
IF I SAVED YOUR DEVICE, DONT FORGET TO HIT THANKS AND DONATE ME IF YOU CAN!..
Confirmed Working on
D800 (AT&T)
D801 (Tmobile)
D802 (International)
D803
Ls980
V980
Other Lg G2 Divice
DONATIONS
M.r. Prasanta Ghosh
https://www.youtube.com/watch?v=E7zbs6of_4I
https://www.youtube.com/user/prosantaghosh
Subscribe to:
Posts (Atom)







